December 14, 2017, 05:10:10 AMLatest Member: Mattes

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - buggs

Pages: [1] 2 3 ... 334
New Members / Re: 1991 Civic EE9 from Germany Update p.76
« on: November 12, 2017, 12:08:42 AM »
Time for an update:

USDM mirrors

Seat belts:
replaced the silver ones for black ones!



Heater Unit
My former heater unit was broken on two tabs. The pre owner tried to fix it but he wasn successful.

Found an EF3 unit and started to change it for mine.

Good brackets:

Theres is an obviously difference between both. The small japanese fingers require larger rocker arm levers^^ Left EDM, right JDM:

Some parts required the changefrom RHD to LHD:

The only difference between both units is the scale on the upper right side:

Everything works fine again and lightens as OEM:

Nonsmoker package:

My car is a non smoker car so there is no need for the cigarette lighter. I was looking for an alternative and found 12V Power outlet from a 1998 USDM Honda Civic LX .

Ready and its working.


I have Integra Type Rx seats installed and found a bnib shiftboot from a Type Rx.

My former shiftboot wasnt fitting exactly on the edges:

Now its done perfectly:

Then in June we had the annual EE-Meeting at the Nürburgring.

Then we had to do TÜV:

All suspension bushings were replaced and minor stuff has been done

After the uddate from OBD0 to OBD1 we were on the motor power testing station (dyno).

Result are 280hp and 310Nm.
Next meeting was the Meeting:


Another dyno gave the same results.

After thinking about selling the car I am at a point where  I think this might be a big mistake.

So at first I started to rearrage the "furniture" in my garage to get more space and to be able to start working on the car this winter :welcometo:



C-bar Pillar installed:

Before - black gloss:

After - Powdercoated RAL9005 to match the rest of the interior parts:

2 or 3 years ago I found that the lock of the glove box is chrome. I always wanted to have that one because I have multiple chrome parts in the interior.

After large search I found out the Accord glove box lock is nearly the same. I found one in the US from a 1988 Accord Sedan.

EE-glove box:

Accord glove box:

As expected both were not interchangeable. The Accord one was larger.

The inside:

The outside:


My very first try of plastic welding:

Then I tried it directly on the good parts:

Not a beauty but its working  :danc1:.

Then the outside:

Finally assembled for the first time:

Due to the cage I wasnt able to open the glove box so I really do not needed the chrome glove box lock^^

But I tried my best:

And the result:

Cheers  :cheers:

Best mEEt for years - from what I think.

Really enjoyed it guys.

Thx alot.

Meets and Events / EE-meeting 2017 - June - 09-11 German Nurburgring
« on: February 27, 2017, 06:36:27 AM »
Cheers guys,

date is set for the Annual EE-Meeting 2017 at the German Nurburgring:

Weekend 09.06.-11.06.2017

Join us on Facebook:

Arrival and Chill out

10:00 Meeting point is the parking lot at the opposite side
Nürburgring Boulevard 1, 53520 Nürburg , it’s the same location where the fotoshooting 2015 took place.

googlemaps: 50°19'58.5"N 6°56'49.2"E

12:00 fotoshooting

you can enter the parking lot via the usual entrance and please pull a ticket.
If you want to leave the the parking lot later, please contact the orga team.
We only can provide free ticket for EE/EF chassis cars (and the orga crew).

Option (not sure yet): Afterwards little convoy, 40-50km, free time

19:00 Dinnerl, La Laterna.


Saturday and Sunday you can go on the Nurburgring with you own car!

Accomodation options (just 2 of so many):


Feel free to ask any questions you might have!

Looking forward to meet some EE/EF enthusiasts again.



New Members / Re: 1991 Civic EE9 from Germany Update p.76
« on: November 17, 2016, 08:31:55 PM »
The season is done and I put her on the road for a last trip on Oct. 29th.

I only did ~100km in 2016 due to changing priorities in private live. And I put her on a trailer on the trip to the  EE-Meeting...

Few things have to be done during the winter and TÜV next summer :D

Few pics from the last meet of the season in Hamburg:

Some friends did a good job on taking quite good pics of the car:

New Members / Re: EE9 1.6 iVT by zielina89
« on: August 08, 2016, 11:19:40 AM »
mmmhhhh - fresh engine bay  :goodstuff:

New Members / Re: TeamVTEC NEW pics on page 50
« on: July 12, 2016, 09:38:37 AM »
Nice upgrade.  :goodstuff:

New Members / Re: 1991 Civic EE9 from Germany Update p.76
« on: July 11, 2016, 02:02:58 PM »
Love the BBS wheels and color, but not the offset...

Me neither - unfortunately these are BMW rims with 5x120 and I needed adapters...

Pages: [1] 2 3 ... 334